P-51D Mustang .60 Gold Edition Kit
Top Flite's Gold Edition P-51D combines Easy Construction with Scale Fighter
Realistic scale details: Vacuum-Formed Canopy with Molded-In Relief
Detail and Vacuum-Formed Exhaust Ports, Machine Gun Exits and Cowl-
Halves molded from ABS are accurately reproduced and make it easy
for the average modeler to achieve stunning results.
The same Fine Quality Materials, Simplified Construction Methods
and step-by-step Instructions as all Gold Edition kits.
Two-piece, Molded Oil-Cooler Scoop seams on the centerline and has
a die-cut internal structure for a very close to scale appearance.
Two huge sheets of excellent, high quality decals included for "Big
Beautiful Doll" scheme (but does NOT include the checkerboard
Fuselage has a very accurate, exact scale outline with scale tail-
Fully-Sheeted Fully-Symmetrical Wing w/Excellent Flight Performance.
All Balsa and Plywood to Complete the kit, Clear Canopy, ABS Cowling
and Detailing parts, Wire Landing Gear, Decals, Illustrated
Instruction Manual, CAD-produced Rolled Plans, Pushrods, and
.60-.90 (2-stroke) or .90-1.20 (4-stroke) Engine
4-6 Channel Radio (5th & 6th channels for retracts and/or flaps)
Engine Mount, Fuel Tank, 4" Spinner, 3¼"-4" Main Wheels, 1¼"
Tailwheel, Wheel Collars, Fuel Tubing, Foam Rubber, Building and
Two Rolls of Covering (plus trim colors)
Wingspan: 65" CG: 3-7/8" back from Leading Edge Break
Wing Area: 734 sq inches (LE break is point where LE goes from
Weight: 8-10lbs steep sweep near fuse to shallow angle)
Length: 56.5" (throws are listed below:)
Wing Loading: 25 to 30oz/sq ft
Degrees Incidence: Engine Thrust: 1.75° down, 1.6° right
Control Throws- High Low
Elevator: 11/16" 7/16"
Rudder: 1-1/8" 7/8"
Ailerons: 11/16" 1/2"
Flaps: 1-1/16" 1-11/16"