|
Graupner Digital DES 427 BB 9mm
DES servos (digital eco servos)
A new series of products to complement our existing range of digital servos.
These DES servos represent a product line which includes a suitable servo for every type of application, covering a vast range of specifications: different case sizes, gearbox types, torque levels and transit speeds, designed for any modeller from the beginner to the competition pilot.
The range includes some fully sealed versions (case screws, case sections and output gear) for increased operational reliability of your models.
Servos with precision-made twin-ballraced gearboxes made of aluminium and other metals guarantee superbly accurate positional performance. High-quality Amtel micro-controllers are used to process the control signals and provide good positional accuracy.
Suitable for RC power models and gliders
- 2 x ball bearings
- Carbonite gear
Info
DES Servo (Digital Eco Servo) A new series of products from the digital servo segment. The DES servos represent a product line which includes a suitable servo for virtually every type of application, covering a vast range of specifications: different case sizes, gear types, torque levels and transit speeds, designed for any modeller from beginner to competition pilot. The range includes some fully sealed versions (case screws, case sections, and output gear) for increased operational reliability of your models.
Servos with precision-made twin-ballraced precision gears made of aluminium and other metals guarantee superbly accurate positional performance.
High-quality Amtel micro-controllers are used to process the control signals and provide good servo positioning accuracy.
Specification
Torque at 4.8 V, approx. [Ncm]: 19 Ncm
Width [mm]: 9 mm
Transit speed at 4.8 V, approx. [Sek / 40°] : 0,13 Sek/40°
Holding torque 6.0V, approx. [Ncm]: 36 Ncm
Charging rate at 4.8 V approx. [mA]: 450 mA
Height [mm]: 29 mm
Transit speed at 6.0 V, approx. [Sek / 40°] : 0,1 Sek/40°
Weight [g]: 9 g
Angular travel incl. trim, approx. : 2 x 45 °
No-load current drain, approx. [mA] : 5 mA
Torque at 6.0 V, approx. [Ncm]: 22 Ncm
Overall length [mm]: 23 mm
Charging rate at 6.0V approx. [mA]: 510 mA
Dimensions [LxWxH in mm]: 23 x 9 x 29 mm
Holding torque 4.8V, approx. [Ncm]: 34 Ncm
Bearings: 2 Ball-Bearing
Replacement gearbox: 7910.2
Gear unit: Carbonit
Operating voltage neutral [V] : 4,8 ... 6,0 V
Neutral impulse: 1,5 ms
Max. operating frequency [ms / Hz]: 3,0 / 333 ms / Hz
Brushless: No
High-Voltage: No
Servo type: digital
Servo series: DES Servo
|
