Ballraced micro wing-mounting servo with excellent shock resistance.
High-quality precision gearbox with 6.2 mm thick plastic output gears
and minimal lost motion. The servo is a good choice for direct actuation
of wing control surfaces (e.g. in F3B and electric-powered model
aircraft), where minimum possible dimensions, good shock resistance and
high power are required. A modified precision electric motor with
single-chip hybrid IC electronics, together with the generously
dimensioned, precision-made, low-slop Delrin gearbox, provide this new
micro wing servo with virtually twice the torque.
Operating voltage 4.8 ... 6 V*
No-load current drain 6 mA
Max. current drain approx. 740 mA
Torque approx. 34 Ncm
Holding power approx.
Angular travel approx. 2 x 45°
Transit speed approx. 0.17 s / 40°
Dimensions (L x W x H) 28 x 13 x 30 mm
Weight approx. 18.5 g
* 4.8 V = 4 x 1.2 V cells 6 V = 4 x 1.5 V cells
** Not suitable as gyro / helicopter servo due to the extreme performance