Material: Foam
MPN: A-CF020A-RTF-PACK
Age Level: 8-11 Years,12-16 Years,17 Years & Up
Model Grade: Hobby Grade
Colour: White
Fuel Type: Electric
Vintage: Yes
Required Assembly: Ready to Go/RTR/RTF (All included)
Brand: Ripmax
Type: Aerobatic & 3D
Lot (Y/N): No
Model: WOT4
Country/Region of Manufacture: China
Ripmax WOT 4 Foam-E Mk2+ **SPECIAL RTF PACK** RC Model Aircraft
WOT 4 Foam-e
Chris Foss' ever popular Wot4 Foam-E Mk2 has been updated into the MK2+. The previous Wot4 Foam-E gained a reputation as one of the best sports models available and the Mk2+ builds on that with numerous new features.
The model comes supplied pre-installed with a powerful brushless outrunner motor, matching 40A, brushless, electronic speed controller and 4 x 9g micro servos. All you need to add is your preferred receiver/transmitter combo and a 3S 2200mAh Li-Po of your choice.
Like the previous version, the Mk2+ only requires minor assembly to get airborne. No glue is required, only a cross headed screwdriver, a 10mm spanner and some double sided tape to mount your receiver.
Buried inside the structure there are numerous changes to the internal design. The tailplane has been re-designed for improved styling with solid tips and inset elevators for improved style and improved control response. The aileron servos now have 'trapped' sockets to make upgrading the servos easy without losing the socket inside the wing! The tail wheel has also been re-designed to be bolted on, allowing easy removal if accidentally broken. The control surfaces use 'live' moulded foam hinges with plastic hinge re-enforcement for extra security and peace of mind. Just like the previous version the control surfaces have carbon fibre re-enforcement for optimal control authority.
The colour scheme has been changed from the previous blue, black and white scheme to a new 'easy to apply' scheme in the yellow, orange and red colours that are synonymous with Chris' classic designs. If you want your Wot4 Foam-E to really stand out, then you can customise it using one of our option decal kits. (Available separately 'Z-CF020/12B' & 'Z-CF020/12C')
The new Mk2+ retains all the flying characteristics that made the previous version so popular. The Wot4 Foam-E Mk2+ has a huge flight range, if you open the throttle you have a 1:1 power to weight ratio perfectly suited to sports aerobatics manoeuvres. Where the Wot4 Foam-E excels is its wide speed range, if you lower the throttle you can fly slowly and use little space. It makes for a perfect first aerobatic model for newer pilots and a really fun sports model for experienced pilots.
• New Bright Colour Scheme
• Pre-Installed Brushless Motor, ESC and 4 x 9g Servos
• Re-Designed Tailplane and Elevator
• Foam 'Live' Hinges with Plastic Hinge Reinforcement
• Modified Internal Structure
• Removable Tail Wheel
• Aluminium Undercarriage
• Option Decal Kits Available
Radiolink T8FB 2.4GHz 8-Channel Transmitter
Key Features
8 channels.
FHSS frequency-hopping spread spectrum protocol.
Full range capability.
Servo reverse on all four primary controls.
Supplied with two R8EF 8-channel receivers.
Supports R8FM 8-channel mini S-Bus receiver.
Proportional sliders to channels 6 and 8.
One two position and one three position switch.
Wireless trainer compatibility (with optional R8FM module).
Wide (4.8 to 18V) voltage range input (AA dry cell or 2S / 4S LiPo compatible).
Transmitter low voltage battery warning.
Sturdy metal carry handle.
Digital trims.
PWM, PPM & S-BUS compatible.
Comfortable ergonomic design.
Integral antennae.
Programmable via Apple and Android smartphone app.
Standard Programming Features
Servo reverse.
Sub trim.
End point.
Fail-safe.
Delay.
Tx alarm.
Programmable mixing.
V-tail mix.
Elevon mix.
Dual rate.
What's in the Box
1x T8FB-BT 2.4GHz 8-channel transmitter.
1 x R8EF 8-channel receiver
1x Throttle stick spring retainer.
1x Instruction manual.
Needed to Complete
4 x AA-size batteries for transmitter.
1x Apple / Android smartphone with free to download RadioLink app.
Hi-Energy 2200mAh 3S 11.1V LiPo Battery (x1 included in bundle)
Overlander RC-3S Charger
Input AC
Watts 20W
Charge Current 0.2 - 1.5A
Compatible Chemistries LiPo
Lithium Cell Count 2 - 3S
Features
The RC-3S charger charges 2 - 3 cell (7.4V – 11.1V) Lithium Polymer batteries.
This charger operates through the mains and charges via the built in JST-XH Balancing port. No additional charge leads are required. The RC-3S automatically balance charges, keeping packs healthy.
This RC-3S Charger comes with its own setting card; this enables the user to easily select the most suitable charge rate for their batteries. The setting card has 3 different options – low current (200mAh), Medium Current (500mAh) and High Current (1.5A for 2S and 1.0A for 3S).
Charging Process
Charging with the RC-3S is extremely easy! Within a few simple steps the charger is ready to do all the hard work for you. The LED lights show the status of the charge and all charge functions automatically cut-off once the process is complete, minimising the risk of human error.
